Limitations
This page describes the limitations of bandwidth.
Bandwidth varies depending upon the type of media as well as the LAN and WAN technologies used. The physics of the media account for some of the difference. Signals travel through twisted-pair copper wire, coaxial cable, optical fiber, and air. The physical differences in the ways signals travel result in fundamental limitations on the information-carrying capacity of a given medium. However, the actual bandwidth of a network is determined by a combination of the physical media and the technologies chosen for signaling and detecting network signals.
For example, current information about the physics of unshielded twisted-pair (UTP) copper cable puts the theoretical bandwidth limit at over 1 Gbps. However, in actual practice, the bandwidth is determined by the use of 10BASE-T, 100BASE-TX, or 1000BASE-TX Ethernet. The actual bandwidth is determined by the signaling methods, NICs, and other network equipment that is chosen. Therefore, the bandwidth is not determined solely by the limitations of the medium.